This lab covers IPv6 static and static default routes. Static routes are a manual way of defining the path a packet should take in the network to get to its destination. The command to write an IPv6 static route is similar to an IPv4 static route except you use the command IPv6 route instead of […]
This lab covers IPv4 static and static default routes. Static routes are a manual way of defining the path a packet should take in the network to get to its destination. The command to write a static route is ip route destination prefix destination prefix mask [outgoing interface | next hop IP address]. In regular […]
This lab only focuses on DHCP, you will need to begin with connectivity, which a good review as well. Before configuring the DHCP steps configure the topology to get connectivity throughout. You should be able to ping from the G0/0/1 interface on Branch to all other interfaces, you will not be able to ping from […]
Devices Used – 2 Cisco routers with 2 ethernet interfaces, 1 layer 2 switch, and a PC **You could use Packet Tracer instead of real devices for this lab. In this lab you will complete initial configurations hostnames, passwords, and IP addressing. Then configure OSPF with options and DHCP server on the HQ router to […]